renderBOXX 10300
Dedicated Rendering System

• Purpose built to power render intensive 3D graphics and animation workflows
• A single renderBOXX 10300 module is comprised of two computers (nodes). That’s two dual Quad Core processor systems (16 cores) in a compact 3.5" w x 7" h x 32" d case
• Multi-processor (Intel® Xeon® "Nehalem" Processor 5500 Series) and networked architecture for outstanding rendering performance
• Ideal for space-restrained creative environments—five modules (80 cores) fit into a 4 rack unit space (7"x19")
• Fully compatible with the previous generation renderBOXX 10200

Features

• High density design: two dual Quad Core processor systems (16 cores) in a compact 3.5" w x 7" h x 32" d case
  
• Intel® Xeon® "Nehalem" Processor 5500 Series running at up to 3.2GHz
  
• More memory capacity featuring 192 GB per node (for a total of 384 GB per module) enables rendering of the most complex scenes and projects
  
• IPMI 2.0 technology featuring KVM over IP enables the industry’s most efficient and flexible management of your render farm network
  
• Outstanding low power efficiency thanks to a shared cooling system and an 80 Plus Rated power supply
  
• 20 to 30% increase in 3D ray trace rendering capability over the previous generation
  
• Available with Microsoft® Windows® or Linux® operating systems

Render Farm

• Five renderBOXX 10300 modules equal 10 computers;
• 10 dual processor systems (80 cores) in a 4 rack unit space (7"x19") are ideal for space-restrained creative environments;
• A dedicated renderBOXX render farm empowers you to deliver complex projects within budget and on schedule by drastically reducing rendering time.

Available Softwares

• Pipelinefx Qube!
  
• V-Ray®
  
• mental ray®
  
• Microsoft® Windows®
  
• Linux

Size and weight
● Height: 13.14 inches (33.4 cm)
● Width: 5.98 inches (15.2 cm)
● Depth: 12.83 inches (32.6 cm)
● Weight: 29.98 lb (13.6 kg)

In the box
● HDOne Unit x 1
● PCI-E or PCI-X card x 1
● PCI Express Cable X 1
● Drive Trays X 8
● Installation CD
● Power Cord X 1

Storage
● Eight independent 3Gb/s SATA hard drives
directly attached to the computer
boardMaximum 8 TB of storage capacity
using 7200RPM SATA II 3G diskdrive.
● Eight independent 3Gb/s SATA hard drives
directly attached to the computer board.
● Maximum 8 TB of storage capacity using
7200RPM SATA II 3G disk drive.

Controller
● DDR 333 MHz SDRAM with 256 Mb

Fan
● Modular design
● Outline Dimension: 92 X 92 X 25 mm
● Rated Voltage: DC 12.0 V
● Rated Current: 0.10 A + 10%
● Rated Power Consumption: 1.20 W + 10%
● Rotational Speed: 1900 R.P.M. +/- 10%
● Max. Airflow: 40.2 CFM (ft3/min)
● Noise Level: 25.0 dB (A)

Power supply
● 200W Cool Swappable Power Supply with Fan.
● Full range: 100~240 VAC (+/- 10% tolerance).
● Frequency: the input frequency range will be
47hz~63hz.
● Steady-state current: 4~2 amps maximum at
any low/high range input.

Environmental requirements
● Operation Temperature: 0°C~60°C
● Storage Temperature: -20°C~70°C
● Operation Humidity: 5%~85%,
Non-condensing
● Storage Humidity: 5%~95%

OS
● Windows XP
● Vista
● Mac OS X
● Linux

Size and weight
● Height: 9.65 inches (33.4 cm)
● Width: 5.51 inches (15.2 cm)
● Depth: 12.99 inches (32.6 cm)
● Weight: 17.97 lb (8.15 kg)

In the box
● HDElement Unit x 1
● Mini SAS Cable X 1
● Drive Trays X 4
● Installation CD
● Power Cord X 1

HDD
● 1TB, 2TB, 3TB, 4TB Capacities Available
● Support SATA II 3.0Gb/s

Fan
● Modular design
● Outline Dimension: 92 X 92 X 25 mm
● Rated Voltage: DC 12.0 V
● Rated Current: 0.16 A + 10%
● Rated Power Consumption: 1.92 W + 10%
● Rotational Speed: 2400 R.P.M. +/- 10%
● Max. Airflow: 50.8 CFM (ft3/min)
● Noise Level: 33.0 dB (A)

Power supply
● 200W Cool Swappable Power Supply with Fan
● Full range: 100~240 VAC (+/- 10% tolerance)
● Frequency: the input frequency range will be
47hz~63hz.
● Steady-state current: 4~2 amps maximum at
any low/high range input voltage.
● Inrush current: 65/130 amps @ 110/220 VAC
(at degrees ambient cold start)
● Power factor correction: PFC can reach the
target of 95% @115V, full load, following the
standard of IEC 1000-3-2

Environmental requirements
● Operation Temperature: 0°C~60°C
● Storage Temperature: -20°C~70°C
● Operation Humidity: 5%~85%, Non-condensing
● Storage Humidity: 5%~95%

Dimensions
● PCI Standard form factor specifications
● (L)312.0 mm X (H)102.4 mm

In the box
● RAID Card Unit x 1
● Installation CD x 1
● Manual x 1
● Tools & Screw

Battery Backup Module
● Dimensions: (L)100.4 mm X (W)39.2 mm X
(H)14.05 mm
● Capacity: 1100mAh
● Normal Valtage: 3.7V
● 3.3V Output Current: 50mA
● Normal Charge Current: 350mA
● Charge Time (Std.): 3.0~4.0 hours
● Operating Temperature: 0°C~40°C

*Optional accessories
● CalDigit Mini-SAS cable
(Part # CBMiniSAS-BC SKU# 702101)
● CalDigit Mini-SAS to SATA cable
(Part # CBMiniSAS-4C SKU# 702102)

Controller
● Intel XScale core (ARM architecture
compliant)

PCI Bus Specifications
● x8 PCI Express host interface
● Supports PCI Express Base Spec 1.0a

Connectivity
● Two x4 internal Mini-SAS (SFF-8087)
connectors
● Three x4 External Mini-SAS (SFF-8088)
connectors

Environmental requirements
● Operating Temperature: 0°C~40°C
● Operating Humidity: 5%~95%,
Non-condensing
● Storage Temperature: -20°C~70°C
● Storage Humidity: 5%~95%,
Non-condensing

Agency Approvals
● FCC Rules, Part 15, Class B
● RoHS Compliant

Driver Support
● Windows® Server 2003, 2008, XP, Vista
● Mac® OS X (10.4.x & 10.5.x)
● Linux