The E-MU 0404 USB 2.0 features:

• Premium 24-bit/192kHz A/D and D/A converters* (A/D: 113dB SNR, D/A: 117dB SNR) deliver unmatched USB audio fidelity
• E-MU XTC Class-A ultra-low noise Mic/Line/Hi-Z preamplifiers (-127dB EIN) with 48V phantom power and ground lift switches enable you to plug microphones, keyboards and guitars straight into your computer with professional results, while the built-in analog soft limiting circuit lets you record a hotter signal without fear of clipping
• Comprehensive digital I/O with optical and coaxial S/PDIF (switchable to AES/EBU) and MIDI In/Out to easily connect all of your digital studio gear and instruments
• Ultra-low latency USB 2.0 drivers offer accurate timing and playback of your recorded audio and software instruments
• Hardware zero-latency direct monitoring (mono/stereo) allows you to record and overdub with no annoying delay
• Plug-and-play operation with hands-on control of all major functions like master level, direct monitoring, preamplifier controls and more
• Cross-platform support (Windows XP/x64 and Mac OS X) and compatibility with most popular audio/sequencer applications (Windows: ASIO2, WDM, MME, AC-3 and DTS Passthru; Macintosh: Apple CoreAudio, CoreMIDI, AC-3 and DTS Passthru)

I/O Configuration:

• Two E-MU XTC™ Ultra-low Noise Mic/Line/Hi-Z Preamps with Soft Limiter and 48V Phantom Power (-127dBu EIN)
• Two 1/4" Balanced Outputs (117dB SNR)
• Stereo 1/8" Speaker Output (117dB SNR)
• 24-bit/96kHz S/PDIF Optical In/Out (Switchable to AES/EBU)*
• 24-bit/96kHz S/PDIF Coaxial In/Out (Switchable to AES/EBU)*
• MIDI Input/Output
• Stereo Headphone Output (114dB SNR)

* Macintosh analog operation up to 96kHz and digital operation up to 48kHz only at this time.

Technical Specification>>

0404 USB 2.0

The E-MU 0404 USB 2.0 features:

Premium 24-bit/192kHz A/D and D/A converters* (A/D: 113dB SNR, D/A: 117dB SNR) deliver unmatched USB audio fidelity
E-MU XTC Class-A ultra-low noise Mic/Line/Hi-Z preamplifiers (-127dB EIN) with 48V phantom power and ground lift switches enable you to plug microphones, keyboards and guitars straight into your computer with professional results, while the built-in analog soft limiting circuit lets you record a hotter signal without fear of clipping
Comprehensive digital I/O with optical and coaxial S/PDIF (switchable to AES/EBU) and MIDI In/Out to easily connect all of your digital studio gear and instruments
Ultra-low latency USB 2.0 drivers offer accurate timing and playback of your recorded audio and software instruments
Hardware zero-latency direct monitoring (mono/stereo) allows you to record and overdub with no annoying delay
Plug-and-play operation with hands-on control of all major functions like master level, direct monitoring, preamplifier controls and more
Cross-platform support (Windows XP/x64 and Mac OS X) and compatibility with most popular audio/sequencer applications (Windows: ASIO2, WDM, MME, AC-3 and DTS Passthru; Macintosh: Apple CoreAudio, CoreMIDI, AC-3 and DTS Passthru)

I/O Configuration:

• Two E-MU XTC™ Ultra-low Noise Mic/Line/Hi-Z Preamps with Soft Limiter and 48V Phantom Power (-127dBu EIN)
• Two 1/4" Balanced Outputs (117dB SNR)
• Stereo 1/8" Speaker Output (117dB SNR)
• 24-bit/96kHz S/PDIF Optical In/Out (Switchable to AES/EBU)*
• 24-bit/96kHz S/PDIF Coaxial In/Out (Switchable to AES/EBU)*
• MIDI Input/Output
• Stereo Headphone Output (114dB SNR)

The E-MU Tracker Pre USB 2.0 features:

Pristine 24-bit/192kHz A/D and D/A converters (A/D and D/A: 112dB measured SNR performance) deliver unmatched USB audio fidelity for pristine audio quality
Preamplified analog signals are available before the A/D converters, allowing the Tracker Pre to be used as a standalone high-quality stereo microphone preamp (using optional power supply)
Hardware zero-latency direct monitoring (mono or stereo) with continuously variable level control
Plug-and-play operation with hands-on control of all major functions like direct monitoring level, headphone level, preamplifier gain and more
Independent ground lift switches for optimal audio fidelity/flexibility
USB bus powered (can also be powered using optional 5V power supply)
Cross-platform support (Mac OS X and Windows XP32/XP64/Vista32/Vista64) and compatibility with most popular audio/sequencer applications (ASIO2, WDM, MME, Apple Core Audio and Core MIDI supported)

I/O Configuration:

Two XTC™ Class-A, ultra-low noise, Mic/Line/Hi-Z preamps. Balanced XLR, 1/4" TRS and 1/8" Inputs (-127dB EIN) with 60dB of gain
1/8" Stereo Condenser Microphone Input with 5V Power
Two 1/4" Balanced/Unbalanced Outputs (112dB SNR)
Two 1/4" Unbalanced Send/Return Inserts prior to A/D converters
Stereo headphone output (112dB SNR)

Technical Specification >>

Modern Symphonic Orchestra

The Modern Symphonic Orchestra offers a comprehensive collection of over 10GB (five DVDs) of the finest string, brass, woodwind, and percussion samples - all meticulously sampled for just the right expressiveness in each recorded note to convey a truly realistic feel.

The library has been set up so that the instrumental sounds of the orchestra are laid out based on a live performance setup from the Baroque era. While there are many ways to set up an orchestra on stage, in working with orchestral samples, this pre-panned Baroque-style setup works the best to give you the most realistic sound possible.

Programmed specifically for the powerful Emulator X/Proteus X sound engine, each of the Modern Symphonic Orchestra's presets is mapped to the MIDI real-time controllers for enhanced expression. The pitch wheel and modulation wheel, and other continuous controllers create various performance effects such as: bend-up/ down, voice switching, chorus, or layer crossfade.

Together with the included Overture 4 SE notation software, E-MU's Modern Symphonic Orchestra offers a total "plug-and-play" soundset for your Emulator X and Proteus X that lets you dial in the perfect orchestral sound every time.

Technical Specifications

Style: Orchestral / Symphonic
For use with Emulator X and Proteus X

Disc 1 - Strings
765 Presets

Disc 2 - Woodwinds
696 Presets

Disc 3 - Brass
728 Presets

Disc 4 - Percussion
26 Presets

Disc 5 - Symphonic
64 Presets

Retail Box Contents

• Five sounds DVDs
• Overture 4 SE notation software CD-ROM
• Sounds booklet

Minimum System Requirements

For use with Emulator X and Proteus X.

The E-MU 0202 USB 2.0 features:

• Premium 24-bit/192kHz A/D and D/A converters* (A/D: 113dB SNR, D/A: 112dB SNR) deliver unmatched USB audio fidelity - gold-plated connectors for pristine audio quality
• Ultra-low noise Mic/Hi-Z/Line preamplifiers with ground lift switches enable you to plug microphones, keyboards and guitars straight into your computer with professional results (XLR, 1/4" TRS, and 1/8" 5V condenser mic input)
• Ultra-low latency USB 2.0 drivers offer accurate timing and playback of your recorded audio and software instruments
• Hardware zero-latency direct monitoring (mono/stereo) allows you to record and overdub with no annoying delay
• Plug-and-play operation with hands-on control of all major functions like direct monitoring level, headphone level, preamplifier gain and more
• Compatibility with most popular audio/sequencer applications - (Windows XP/x64: ASIO2 and WDM; Macintosh OS X: Apple CoreAudio)

I/O Configuration:

• Class-A Ultra-low Noise Mic/Hi-Z/Line Preamp XLR, 1/4" TRS and 1/8"* Inputs (113dB SNR)
• Class-A Hi-Z/Line Preamp 1/4" Input (113dB SNR)
• Two 1/4" Outputs (112dB SNR)
• 1/8" Stereo Speaker Output (112dB SNR)
• Stereo Headphone Output (108dB SNR)

* Macintosh analog operation up to 96kHz only at this time.

E-MU's Xmidi 1x1 is a plug-and-play USB MIDI Interface that adds an ultra-fast MIDI input and output (16 MIDI channels in/out) to your computer. The Xmidi 1x1 is bus-powered for total portability and offers status indicators for input signal, output signal and power.

The E-MU Xmidi 1x1 features:

1 MIDI in/1 MIDI out

• USB 1.1
• USB bus-powered
• Ultra-fast MIDI response
• Active-Sensing messages filtered
• MME, DirectMusic and CoreMIDI supported
• Multiple device support

Dimensions

The Xmidi 1x1 cable measures 3 feet (0.92 meters) on the USB side and 7 feet (2.1 meters) on the MIDI side.

Retail Box Contents

• E-MU Xmidi 1x1
• Owner's Manual
• E-MU Software/Manual CD-ROM with:
  • Windows XP and x64 Drivers
  • Owner's Manual PD

Minimum System Requirements

Windows:

Microsoft® Windows® XP SP2 or greater, Windows XP x64, or Windows Vista
Intel® or AMD® processor - 600MHz or faster
128MB System RAM
1 available USB port
CD-ROM or DVD-ROM drive

Macintosh:

Apple® Macintosh® OS X 10.3.9 or greater
450MHz G4 processor or faster
128MB System RAM
1 available USB port
CD-ROM or DVD-ROM drive (for manual)