Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

I Home I Contact us I Recruitment I
about us training news support
 
  • Capture
  • Studio One


Capture

  • CAPTURE is a digital audio multi-tracking application designed to make recording quick and easy to set-up and operate. Perfect for live recording or mixing your audio real-time to a stereo audio file, CAPTURE software was designed to interface with StudioLive 16.4.2 perfectly to allow instant setup and recording of performances.
  • In addition to recording the 16 channels of the StudioLive 16.4.2, CAPTURE also allows you to record a single stereo track from the StudioLive’s Main Output, one pair of Subgroup Outputs or a pair of Aux Sends; giving you the option to record your Main Mix or create a separate recording mix. And you can arm all 18 tracks to record with the click of a single button.
  • Traditionally, the features that make a DAW application a powerful tool for audio production and mixing in the studio are the very culprits that bog down a computer’s performance and make for an unstable live recording environment. CAPTURE simplifies this environment, providing only the tools necessary to record a great performance without placing huge demands on your CPU’s resources.
  • With the look and feel of industry standard digital multi-track hard disk recorders, CAPTURE software is instantly familiar to every musician and engineer. CAPTURE also provides you with essential editing capability as well as the ability export .wav and Open TL file formats for compatibility with ProTools, Cubase, Nuendo, Logic, Sonar and all other recording and music production software. You can also play back your recorded tracks through the Firewire Playback inputs on the StudioLive 16.4.2 to create your mix in real-time using the dynamics and 32-bit floating point DSP of StudioLive 16.4.2 and then print the final mix back into CAPTURE. Now that’s power!
  • With CAPTURE you can:
    • Place markers on the fly to divide the songs in a live set and then export each song separately to sell a live CD at the show
    • Record the Main Output from your StudioLive and then stream the live show as a pod cast while the band is breaking down.
    • Export your recordings as single audio tracks or in Open TL format and import them into your favorite DAW application to create your mix.
    • Use the Firewire Playback option to stream the raw recorded audio back into the StudioLive, create a live mix and print it back into Capture.

Features

  • 18x18 Multi-track recording application (16 input channels and stereo stream from StudioLive)
  • Record with two mouse clicks
  • Essential Editing Suite (copy, cut, paste, splice, resize)
  • Peak LED-style meter bridge with clip indicators
  • Marker placement and recall
  • Export between marker
  • Record stereo mix of StudioLive Mixer
  • Full transport control
  • Import/Export individual .wav or OpenTL


Studio One Artist

Studio One Artist is not a dumbed-down, “lite” version of Studio One Pro. Rather, it’s just one version of the same creative recording and production platform—with unlimited track count and the same intuitive interface. Studio One Artist is bundled with all PreSonus FireStudio audio interfaces and is also available separately from authorized dealers.

 

  • Elegant single-window work environment
  • Powerful drag-and-drop functionality
  • Unlimited audio tracks, MIDI tracks, virtual instruments, buses, and FX channels
  • Content browser with convenient sort options and preview player
  • Automatic delay compensation
  • Advanced automation
  • 32-bit audio processing
  • Easy-to-use sidechain routing
  • Stunning virtual instruments
  • User-friendly sampler
  • Most intuitive MIDI-mapping system available
  • Real-time audio timestretching and resampling
  • K-System metering
  • Compatible with any ASIO-, Windows Audio-, or Core Audio-compliant audio interface
  • Works with key commands from Pro Tools, Cubase, and Logic.
  • Native Effects™ 32-bit effects library with 20 dynamics processors, reverbs, modulations effects, amp simulators, etc.
    • Ampire - Amplifier-Modeling
    • Auto Filter - Envelope Filter
    • Beat Delay - Tempo-Synchronized Delay
    • Binaural Pan - Stereo Panning Effect
    • Channel Strip - Dynamics Processing and Equalizer
    • Chorus - Mono/Stereo Chorus
    • Compressor - Mono/Stereo Variable Compressor
    • Flanger - Stereo/Mono Flanger
    • Limiter - Mono/Stereo Limiter
    • Mixtool - Phase and MS Utility
    • MixVerb - Mono/Stereo Reverb
    • Phase Meter phase-correlation analysis
    • Phaser mono/stereo phaser
    • Pro EQ 7-band parametric EQ
    • Red Light Distortion distortion processor
    • Room Reverb stereo/mono room reverb
    • Spectrum Meter frequency analyzer
    • Tricomp 3-band compressor
    • Tuner instrument tuner
    • X-Trem mono/stereo tremolo
  • Four virtual instruments
    • Impact™ Sample Trigger Drum Instrument with 32 drum kits by Ueberschall™
    • Presence™ Sample Player Virtual Instrument with 200 sampled instruments by Digital Sound Factory™ plus 100 additional premium Digital Sound Factory sampled instruments
    • SampleOne™ Sampler Virtual Instrument
    • Mojito™ Analog-Modeling Subtractive Synthesizer

  • Native Instruments™ Kore™ Player with 150 instruments
  • Custom SoundPack for Kore™ Player, with 200 more instruments
  • Native Instruments™ Guitar Rig LE
  • Toontrack™ EZDrummer Lite
  • Nearly 1,400 drum loops (1.4 GB!) by Bandmate™ Loops plus…
  • More than 2,000 additional loops (4 GB) by Bandmate Loops
  • Free jambalaya recipe!



FireStudio

  • High-speed FireWire (IEEE 1394) audio interface
  • 24-bit resolution, up to 96K sampling rate
  • 26 simultaneous inputs and outputs
  • 8 Class A microphone preamps w/ trim control
  • 8 analog line Inputs, 2 Instrument Inputs
  • 16 channels of optical ADAT I/O (8 ch. via 96k dual SMUX)
  • S/PDIF I/O, MIDI I/O
  • DICE II Chipset - ultra efficient data transfer
  • JetPLL™ – jitter elimination technology
  • Zero latency DSP full-matrix mixer/router
  • PreSonus ProPak Complete Audio Software Suite with Cubase LE, Reason Adapted, Amplitube LE, BFD Lite,
  • Drumagog LE and more

Computer System Requirements
Below are the minimum computer system requirements for your FireStudio.

Windows

  • OS: Microsoft Windows XP SP1
  • Computer: Windows compatible computer with FireWire port.
  • CPU/Clock: Pentium, Celeron with 1.6Ghz or higher
  • Memory(RAM): 512 MB (1 GB recommended)
  • Macintosh
  • OS: MacOS X 10.4.x or later
  • Computer: Apple Macintosh series with on-board FireWire port.
  • CPU/Clock: PowerPC G4/Dual 1 GHZ or faster, all Intel-based Mac models.
  • Memory(RAM): 512 MB (1 GB recommended)

Microphone Preamp (XLR Balanced)
All measurements Microphone Input to Direct Output

Frequency Response (+0,- 0.5dB) 20Hz to 50KHz
Frequency Response (+0/-3.0 dB) 20Hz to 150KHz
Input Impedance 1600 Ohm
THD+N (unwtd, 1KHz @ +4dBu Output, Unity Gain) <0.003%
EIN (unwtd, 55dB Gain, 150 Ohm Input, 20Hz to 22KHz) -126dBu
S/N Ratio (Unity Gain, unwtd, Ref. = +4dBu, 20Hz to 22KHz) >101dB
Common Mode Rejection Ratio (1KHz, 55dB Gain) >55dB
Gain Control Range (+/-1dB) -6dB to 55dB
Maximum Input Level (Unity Gain, 1KHz @ 0.5% THD+N) +17dBu
Phantom Power (+/- 2VDC) +48VDC
Instrument Input (1/4” TRS, Preamps 1 & 2)
Input Impedance 1 Mega Ohm

Line Inputs (1/4” TRS, Preamps 3 to 8)
All measurements Line Input to Direct Output

Frequency Response (+0,- 0.5dB) 20Hz to 50KHz
Frequency Response (+0/-3.0 dB) 20Hz to 150KHz
Input Impedance (Balanced) 10 KOhm
THD+N (unwtd, 1KHz @ +4dBu Output, Unity Gain) < 0.003%
S/N Ratio (Unity Gain, unwtd, Ref. = +4dBu, 20Hz to 22KHz) >101dB
Gain Control Range (+/-1dB) -9dB to +12dB
Maximum Input Level (Unity Gain, 1KHz @ 0.5% THD+N) +23dBu
Insert Jacks (1/4” TRS)
Send Output Impedance (Unbalanced, Ring) 51 Ohm
Return Input Impedance (Unbalanced, Tip) 10KOhm
Direct Outputs/DAC Outputs (1/4” TRS)
Output Impedance (Impedance Balanced) 51Ohm
Signal Level LEDs
Clip (+/- 0.5dBu) +18dBu
Digital Audio
ADC Dynamic Range (Awtd, 48KHz Sample Rate) 107dB
DAC Dynamic Range (Awtd, 48KHz Sample Rate) 110dB
Bit Depth 24
Reference Level for 0dBFS +18dBu
Digital Audio Output (2-Toslink™ Connectors, 8 channels) ADAT/SMUX
Digital Audio Input (2-Toslink™ Connectors, 8 channels) ADAT/SMUX
Internal Sample Frequency Selections (KHz) 44.1, 48, 88.2, 96
External Sample Frequency Inputs BNC, ADAT (SMUX),SPDIF
BNC Word Clock Output Level (75 Ohm load) 4.5V
BNC Word Clock Input Level Range 3.0 to 5.5V
Power
Input Voltage Range 18 to 30VDC
Power Requirements (Continuous) 24W
DC Input Connector Type 5.5mm OD/2.1mm ID Barrel, Center Positive
External Switching Power Supply 90-230VAC/35W
Digital
Jitter <20ps RMS, 20Hz-20kHz
Jitter Attenuation >60dB, 1ns in=>1ps out

 



FireStudio Lightpipe

The PreSonus FireStudio Lightpipe is a 32 input, 32 output, 24-bit/96k lightpipe to FireWire computer recording system for professional-quality digital audio recording. Compatible with both Windows and Macintosh computer systems, the FireStudio Lightpipe allows you to convert up to 32 channels of ADAT or SMUX optical lightpipe input/output via FireWire providing a multi-channel computer interface for digital mixers, AD/DA converters or ADAT recorders. FireStudio Lightpipe features JetPLL™ jitter elimination technology for ultra tight synchronization and improved imaging and clarity along with a 34x4 DSP matrix mixer allowing you to create dual zero-latency stereo monitor mixes. Fast-acting input LED meters are located on the front panel for quick and easy visual monitoring of all signals. The FireStudio Lightpipe is the perfect interface for expanding and enhancing your music production!

Computer System Requirements

Windows

  • OS: Microsoft Windows XP and Windows Vista (32-bit)
  • CPU/Clock: or Athlon 900MHz (1.5 GHz or higher recommended)
  • Memory(RAM): 1 GB (more recommended

Macintosh

  • OS: MacOS X 10.4.x or later (10.5 supported with driver update)
  • CPU/Clock: PowerPC G4/Dual 1 GHZ or faster, all Intel-based Mac models.
  • Memory(RAM): 1 GB (more recommended)

Windows and Macintosh Systems

  • IEEE 1394 FireWire 400 Port
  • Internet connection
  • CD-ROM drive
  • Internal or external 7200RPM storage drive is highly recommended
Digital Audio Transfer optical ADAT to FireWire (IEEE 1394)
FireWire IEEE 1394 Speed 400mbps
Maximum Inputs/Outputs 32 inputs/ 32 outputs
Supported Sample Rates 44.1, 48, 88.2, 96kHz
Control Panel Parameters Sample Rate, Latency (PC only), Clock Source
Optical 1 I/O Ch. 1-8 (44.1, 48k); Ch. 1-4 (88.2, 96k)
Optical 2 I/O Ch. 9-16 (44.1, 48k); Ch. 5-8 (88.2, 96k)
Optical 3 I/O Ch. 17-24 (44.1, 48k); Ch. 9-12 (88.2, 96k)
Optical 4 I/O Ch. 25-32 (44.1, 48k); Ch. 13-16 (88.2, 96k)
MIDI I/O Standard 5-Pin DIN
Main analog outputs Impedance Balanced TRS
Headphone amplifier 150 mW
Jitter Specification <20ps RMS, 20Hz-20kHz
Jitter Attenuation >60dB; 1ns in approx.1ps out
Power Supply IEC Internal switching 100V-240V
Word Clock BNC Input and Output, 75 0hm
Power
Input Connector Type IEC
Input Voltage (factory configured) 90 to 240 VAC
Power Requirements (Continuous) 20W
Physical
Main Chassis
Package Type 1U - steel chassis
Dimensions 19(W) X 1.75(H) X 7(D) inches
Weight 7.0 lbs

 



FireStudio Project

  • High-Speed FireWire (IEEE 1394) Audio Interface
  • Up to 96K Sampling Rate
  • 8 XMAX Class A Microphone Preamplifiers (+60dB gain) w/ Trim Control
  • 8 Analog Mic/Line Inputs, 2 Instrument Inputs
  • 8 Analog Line Outputs
  • S/PDIF Digital Input and Output, MIDI Input and Output
  • Balanced Send / Return for Channels 1 and 2
  • Zero Latency Monitoring with FireControl Mixer/Router
  • Separate Balanced Main Outputs and 8 Balanced Analog Outputs
  • Daisy-chain multiple FireStudio Project’s and FireStudio Tube’s (see instructions)
  • FREE ProPak Software Suite including Cubase LE 4 Audio Production Software

Computer System Requirements
Below are the minimum computer system requirements for your FireStudio Project.
Windows

  • OS: Microsoft Windows XP SP2 and Vista 32
  • Computer: Windows compatible computer with FireWire port.
  • CPU/Clock: Pentium, Celeron with 1.6Ghz or higher
  • Memory(RAM): 512 MB (1 GB recommended)

Macintosh

  • OS: MacOS X 10.4.x or later (10.5 supported with driver update)
  • Computer: Apple Macintosh series with on-board FireWire port.
  • CPU/Clock: PowerPC G4/Dual 1 GHZ or faster, all Intel-based Mac models.
  • Memory(RAM): 512 MB (1 GB recommended)
Microphone Preamp
Type XLR Female Balanced
Frequency Response (±0.5 dB) 20 Hz to 50 kHz
Frequency Response (±3.0 dB) 20 Hz to 150 kHz
Input Impedance (Balanced) 1600 Ω
THD+N (unwtd, 1kHz @ +4 dBu Output, Unity Gain < 0.0003%
EIN (unwtd, 55dB Gain, 150 Ω Input, 20Hz to 22kHz -126 dBu
S/N Ratio (Unity Gain, unwtd, Ref. = +4 dBu, 20Hz to 22 kHz > 101dB
Common Mode Rejection Ratio (1 kHz, 55 dB Gain) > 55dB
Gain Control Range (± 1dB) -4 dB to 50dB
Maximum Input Level (Unity Gain, 1 kHz @ 0.5% THD+N) +14 dBu

Signal Level LEDS
Red / Clip (±0.5 dB)
Yellow (±0.5 dB)
Green (±0.5 dB)


+10 dBu (o dBFS)
+4 dBu (-6 dBFS)
-30 dBu (-40 dBFS)

Phantom Power (±2 VDC) +48 VDC
Instrument Input (channels 1 & 2 only)
Type XLR Female Balanced
Input Impedance 1 MΩ
Line Inputs
Type XLR Female Balanced
Frequency Response (±0.5 dB) 20 Hz to 50 kHz
Frequency Response (±3.0 dB) 20 Hz to 150 kHz
Input Impedance (Balanced) 10 KΩ
THD+N (unwtd, 1kHz @ +4 dBu Output, Unity Gain < 0.0003%
S/N Ratio (Unity Gain, unwtd, Ref. = +4 dBu, 20Hz to 22 kHz > 101dB
Gain Control Range (±1 dB) -16dB to +16dB
Maximum Input Level (Unity Gain, 1 kHz @ 0.5% THD+N) +10 dBu
Maximum Input Level (Minimum Gain, 1 kHz @ 0.5% THD+N) +22 dBu
Line Ouputs (including Preamp Output, General Purpose Outputs and Main Outputs)
Type ¼" TRS Balanced
Output Impedance 51 Ω
Headphone Output
Type ¼" TRS Active Stereo
Maximum Output 150 mW/CH @ 60 Ω Load
Frequency Response (±1.0 dB) 10 Hz - 70kHz
Digital Audio
FireWire (IEEE 1394) Speed 400mbps
ADC Dynamic Range (Awtd, 48 kHz Sample Rate) 114 dB
DAC Dynamic Range (Awtd, 48 kHz Sample Rate) 114 dB
Bit Depth 24
Reference Level for 0dBFS +10 dBu
Internal Sample Frequency Selections (kHz) 44.1, 48, 88.2, 96
Jitter Specification <20ps RMS, 20Hz-20kHz
Jitter Attenuation >60dB; 1ns in approx.1ps out
Power
Input Connector Type IEC
Input Voltage (factory configured) 90 to 230 VAC
Power Requirements (Continuous) 20W
Physical
Main Chassis
Package Type 1U - steel chassis
Dimensions 19(W) X 1.75(H) X 7(D) inches
Weight 7.0lbs

 



FireStudio Tube

  • 24-bit/96K firewire (IEEE 1394)
  • 16 inputs/6 outputs simultaneous record/playback channels
  • 2 SuperChannels (tube microphone/instrument preamplifier with analog limiter)
  • 8 XMAX microphone preamplifiers
  • 2 PreSonus microphone/instrument preamplifiers
  • 6 balanced TRS line outputs
  • MIDI Input/Output
  • 16x8 FireControl DSP mixer/router
  • JetPLL Sync for improved imaging and clarity
  • High performance A/D/A converters (114 dynamic range)
  • Windows and Macintosh compatible
  • Daisy-chain multiple FireStudio Project’s and FireStudio Tube’s (see instructions)
  • ProPak Software Suite including Cubase LE 4 audio production software

Computer System Requirements
Below are the minimum computer system requirements for your FireStudio Tube.

Windows

  • OS: Microsoft Windows XP and Windows Vista
  • * CPU/Clock: or Athlon 900MHz (1.5 GHz or higher recommended)
    * Memory(RAM): 1 GB (more recommended)

Macintosh

  • OS: MacOS X 10.4.x or later (10.5 supported with driver update)
  • CPU/Clock: PowerPC G4/Dual 1 GHZ or faster, all Intel-based Mac models.
  • Memory(RAM): 1 GB (more recommended)

Windows and Macintosh Systems

  • IEEE 1394 FireWire 400 Port
  • Internet connection
  • DVD-ROM drive
  • Internal or external 7200RPM storage drive is highly recommended
Microphone Preamp 1-8 (XLR Balanced)
Type XLR Female Balanced
Frequency Response (±0.5 dB) 20 Hz to 50 kHz
Frequency Response (±3.0 dB) 20 Hz to 150 kHz
Input Impedance (Balanced) 1600 Ohm
THD+N (unwtd, 1kHz @ +4 dBu Output, Unity Gain < 0.0003%
EIN (unwtd, 55dB Gain, 150 Ω Input, 20Hz to 22kHz -126 dBu
S/N Ratio (Unity Gain, unwtd, Ref. = +4 dBu, 20Hz to 22 kHz > 101dB
Common Mode Rejection Ratio (1 kHz, 55 dB Gain) > 55dB
Gain Control Range (± 1dB) -4 dB to 50dB
Maximum Input Level (Unity Gain, 1 kHz @ 0.5% THD+N) +14 dBu
Phantom Power (±2 VDC) +48 VDC
Instrument Input
Type 1/4" TS
Input Impedance 1 Mega Ohm
Preamps 15 & 16
Gain Reduction -16 to +20 dB
ThD+N (unwtd, 1KHz @ +4dBu Output, Unity Gain) <.2%
Limiter 0 to -18dBu
Gain Control (+/-1dB) +4dB to +58dB
80 Hz filter < 0.0003%
Line Inputs 9-14 (1/4” TRS)
Frequency Response (+0,- 0.5dB) 20Hz to 50kHz
Frequency Response (+0/-3.0 dB) 20Hz to 150kHz
Input Impedance (Balanced) 10 KOhm
THD+N (unwtd, 1KHz @ +4dBu Output, Unity Gain) < 0.003%
S/N Ratio (Unity Gain, unwtd, Ref. = +4dBu, 20Hz to 22KHz) >101dB
Maximum Input Level (Unity Gain, 1KHz @ 0.5% THD+N) +20dBu
Headphone Output
Type TRS Active Stereo
Maximum Output 150 mW/CH @ 60 Ohm Load
Frequency Response (±1.0 dB) 10 Hz - 70kHz
Digital Audio
FireWire (IEEE 1394) Speed 400mbps
ADC Dynamic Range (Awtd, 48 kHz Sample Rate) 114 dB
DAC Dynamic Range (Awtd, 48 kHz Sample Rate) 114 dB
Bit Depth 24
Reference Level for 0dBFS +10 dBu
Internal Sample Frequency Selections (kHz) 44.1, 48, 88.2, 96
Jitter Specification <20ps RMS, 20Hz-20kHz
Jitter Attenuation >60dB; 1ns in approx.1ps out
Power
Input Connector Type IEC
Input Voltage (factory configured) 90 to 240 VAC
Power Requirements (Continuous) 20W
Physical
Main Chassis
Package Type 1U - steel chassis
Dimensions 19(W) X 1.75(H) X 9.5(D) inches
Weight 10.0lbs

 



FP10

  • High-Speed FireWire (IEEE 1394) Audio Interface
  • Up to 96K Sampling Rate
  • 8 XMAX Class A Microphone Preamplifiers (+60dB gain) w/ Trim Control
  • 8 Analog Mic/Line Inputs, 2 Instrument Inputs
  • 8 Analog Line Outputs
  • S/PDIF Digital Input and Output, MIDI Input and Output
  • Balanced Send / Return for Channels 1 and 2
  • Zero Latency Monitoring
  • Separate Main and Cue Mix Outputs
  • Daisy-chain multiple FP10's for additional inputs/outputs
  • FREE ProPak Software Suite including Cubase LE Audio Production Software Included

Computer System Requirements

Windows

  • OS: Microsoft Windows XP (32-bit & 64-bit) and Windows Vista (32-bit & 64-bit)
  • CPU/Clock: or Athlon 900MHz (1.5 GHz or higher recommended)
  • Memory(RAM): 1 GB (more recommended)

Macintosh

  • OS: MacOS X 10.3.5 or later
  • CPU/Clock: PowerPC G4/Dual 1 GHZ or faster, all Intel-based Mac models.
  • Memory(RAM): 1 GB (more recommended)

Windows and Macintosh Systems

  • IEEE 1394 FireWire 400 Port
  • Internet connection
  • DVD-ROM drive
  • Internal or external 7200RPM storage drive is highly recommended
Microphone Preamp 1-8 (XLR Balanced)
Type XLR Female Balanced
Frequency Response (±0.5 dB) 20 Hz to 50 kHz
Frequency Response (±3.0 dB) 20 Hz to 150 kHz
Input Impedance (Balanced) 1600 Ohm
THD+N (unwtd, 1kHz @ +4 dBu Output, Unity Gain < 0.005%
EIN (unwtd, 55dB Gain, 150 Ω Input, 20Hz to 22kHz -125 dBu
S/N Ratio (Unity Gain, unwtd, Ref. = +4 dBu, 20Hz to 22 kHz > 101dB
Common Mode Rejection Ratio (1 kHz, 55 dB Gain) > 55dB
Gain Control Range (± 1dB) -4 dB to 50dB
Maximum Input Level (Unity Gain, 1 kHz @ 0.5% THD+N) +14 dBu
Phantom Power (±2 VDC) +48 VDC
Instrument Input (1/4" TS input channels 1-2)
Type 1/4" TS
Input Impedance 1 Mega Ohm
 
Line Inputs (1/4” TRS input channels 3-8)
Frequency Response (+0,- 0.5dB) 20Hz to 50kHz
Frequency Response (+0/-3.0 dB) 20Hz to 150kHz
Input Impedance (Balanced) 10 KOhm
THD+N (unwtd, 1KHz @ +4dBu Output, Unity Gain) < 0.003%
S/N Ratio (Unity Gain, unwtd, Ref. = +4dBu, 20Hz to 22KHz) >101dB
Maximum Input Level (Unity Gain, 1KHz @ 0.5% THD+N) +20dBu
Line Outputs (1/4" TRS)
Output Impedance 51 Ohms
Cue and Main Output Impedance 51 Ohms
Headphone Output
Type TRS Active Stereo
Maximum Output 150 mW/CH @ 60 Ohm Load
Frequency Response (±1.0 dB) 20 Hz - 20kHz
Digital Audio
FireWire (IEEE 1394) Speed 400mbps
ADC Dynamic Range (Awtd, 48 kHz Sample Rate) 107 dB
DAC Dynamic Range (Awtd, 48 kHz Sample Rate) 107 dB
Bit Depth 24
Internal Sample Frequency Selections (kHz) 44.1, 48, 88.2, 96

Simultaneous record/playback channels and sample rate

Single Unit (10 in, 10out @ 24/96K)
Two FP10's (up to 16 in/out @ 24-bit/ 44.1k or 48K)
Three FP10's (up to 24 in/out @ 24-bit/44.1k or 48k)
Note: FP10's and FirePod's can be daisy-chained

   
Power
Input Connector Type IEC
Input Voltage (factory configured) 90 to 240 VAC
Power Requirements (Continuous) 20W
Internal Sample Frequency Selections (kHz) 44.1, 48, 88.2, 96
Physical
Main Chassis  
Package type 1U - steel chassis
Dimensions 19"x1.75"x7"
Weight 8 lbs

 



Inspire 1394

  • 24-bit/96k A/D/A sample rate
  • Four simultaneous input channels
  • Two microphone/instrument preamplifiers
  • Switchable line input or phono input(with RIAA filter)
  • Software Control Panel and zero latency mixer
  • Window XP and Macintosh OSX compatible
  • FireWire bus-powered or powered externally
  • ProPak Software Suite

Computer System Requirements

Windows

  • OS: Microsoft Windows XP (32-bit & 64-bit) and Windows Vista (32-bit & 64-bit)
  • CPU/Clock: or Athlon 900MHz (1.5 GHz or higher recommended)
  • Memory(RAM): 500 MB (more recommended)

Macintosh

  • OS: MacOS X 10.4.x or later (10.5 supported with driver update)
  • CPU/Clock: PowerPC G4/Dual 1 GHZ or faster, all Intel-based Mac models.
  • Memory(RAM): 500 MB (more recommended)

Windows and Macintosh Systems

  • IEEE 1394 FireWire 400 Port
  • Internet connection
  • DVD-ROM drive
  • Internal or external 7200RPM storage drive is highly recommended
Microphone Preamps 1-2
Microphone input XLR Female
Frequency Response (±0.5 dB) 10 Hz to 50 kHz
Instrument Input Impedance (Balanced) 500k Ohm
THD+N (unwtd, 1kHz @ +4 dBu Output, Unity Gain < 0.01%
Phantom Power (±2 VDC) +48 VDC
 
Instrument Input 1-2
Type 1/4" TS
Input Impedance 1 Mega Ohm
 
Line Inputs 3-4 (RCA)
Frequency Response (+0,- 0.5dB) 10Hz to 50kHz
Input Impedance (Balanced) 47.5 KOhm
 
Headphone Output
Type Mini TRS Active Stereo
Maximum Output 150 mW/CH @ 60 Ohm Load
Frequency Response (±1.0 dB) 20 Hz - 20kHz
 
Digital Audio
FireWire (IEEE 1394) Speed 400mbps
ADC Dynamic Range (Awtd, 48 kHz Sample Rate) 102 dB
DAC Dynamic Range (Awtd, 48 kHz Sample Rate) 108 dB
Bit Depth 24
Internal Sample Frequency Selections (kHz) 44.1, 48, 88.2, 96
Daisy-chain multiple Inspire 1394 4 units total, maximum of 16 input/output at 96kHz
 
Power
Bus Power Six-pin FireWire port
Power Supply Ext. line Transformer, Internal switching (factory configured)
 
Physical
Dimensions 5.5"(W) X 2"(H) X 5.5"(D) inches
Weight 5.0 lbs

 

Sorenson Squeeze 5 Pro is the industry-leading video encoding tool, enabling users to efficiently re-purpose video content for web, CD, DVD or  applications.  Squeeze allows users to output content in all popular formats including: Flash, QuickTime, Windows Media, MPEG-1, MPEG-2 and MPEG-4.

Sorenson Squeeze 5 Pro includes Sorenson Video 3 Pro, Sorenson Spark Pro, Sorenson MPEG-4 Pro and Sorenson H.264 Pro video codecs.

Includes the On2 VP6 Pro Encoder and BIAS Soundsoap plug-ins.  Also includes the Complete Squeeze 5 Training DVD.

Sorenson Squeeze is a single user license.  For multiple-seat enterprise licenses, see Sorenson Squeeze 5 Pro Multi-User.

Sorenson Squeeze 5 Pro is the industry-leading video encoding tool, enabling users to efficiently re-purpose video content for web, CD, DVD or  applications.  Squeeze allows users to output content in all popular formats including: Flash, QuickTime, Windows Media, MPEG-1, MPEG-2 and MPEG-4.

Sorenson Squeeze 5 Pro includes Sorenson Video 3 Pro, Sorenson Spark Pro, Sorenson MPEG-4 Pro and Sorenson H.264 Pro video codecs.

Includes the On2 VP6 Pro Encoder and BIAS Soundsoap plug-ins.  Also includes the Complete Squeeze 5 Training DVD.

Sorenson Squeeze is a single user license.  For multiple-seat enterprise licenses, see Sorenson Squeeze 5 Pro Multi-User.

Sorenson Squeeze 5 Pro is the industry-leading video encoding tool, enabling users to efficiently re-purpose video content for web, CD, DVD or  applications.  Squeeze allows users to output content in all popular formats including: Flash, QuickTime, Windows Media, MPEG-1, MPEG-2 and MPEG-4.

Sorenson Squeeze 5 Pro includes Sorenson Video 3 Pro, Sorenson Spark Pro, Sorenson MPEG-4 Pro and Sorenson H.264 Pro video codecs.

Includes the On2 VP6 Pro Encoder and BIAS Soundsoap plug-ins.  Also includes the Complete Squeeze 5 Training DVD.

Sorenson Squeeze is a single user license.  For multiple-seat enterprise licenses, see Sorenson Squeeze 5 Pro Multi-User.

Sorenson Squeeze 5 Pro is the industry-leading video encoding tool, enabling users to efficiently re-purpose video content for web, CD, DVD or  applications.  Squeeze allows users to output content in all popular formats including: Flash, QuickTime, Windows Media, MPEG-1, MPEG-2 and MPEG-4.

Sorenson Squeeze 5 Pro includes Sorenson Video 3 Pro, Sorenson Spark Pro, Sorenson MPEG-4 Pro and Sorenson H.264 Pro video codecs.

Includes the On2 VP6 Pro Encoder and BIAS Soundsoap plug-ins.  Also includes the Complete Squeeze 5 Training DVD.

Sorenson Squeeze is a single user license.  For multiple-seat enterprise licenses, see Sorenson Squeeze 5 Pro Multi-User.