NT2000

Seamlessly Variable Dual 1" Condenser Microphone

The world's first large diaphragm condenser studio microphone with seamlessly variable Polar Patterns, Filter and Pad located conveniently on the microphone body.

The NT2000's state of the art surface-mount electronics combined with the Australian designed and manufactured HF1 Capsule, provide extremely low self-noise (7 dBA) and a maximum SPL of 147 dB (157 dB with pad fully engaged) ensuring exceptional results and the ultimate in recording creativity.

Features:

• Large 1" (25mm) HF1 gold sputtered capsule
  
• Continuously variable polar pattern, from Omni to Cardioid to Figure 8 controlled on the mic
  
• Continuously variable PAD and High-Pass Filter
  
• Ultra low noise, transformerless surface mount circuitry
  
• Wide dynamic range
  
• High strength welded and heat treated steel mesh head
  
• Internal capsule shock mounting

Specifications:

• Power: P48 (48V) phantom supply
  
• Acoustic Principle: Pressure, Pressure gradient
  
• Directional Pattern: Continuously variable multi pattern - Omni, through Cardioid to Figure 8
  
• Frequency range: 20 Hz - 20 kHz
  
• Output impedance: 200Ω
  
• Signal noise ratio: >87 dB SPL (A - weighted per IEC651)
  
• Equivalent noise: 7 dB SPL (A - weighted per IEC651)
  
• Maximum SPL: 147dB SPL (@ 1kHz, 1% THD into 1KΩ load) (157dB with PAD at maximum)
  
• Maximum output voltage: +15dBu (@ 1kHz, 1% THD into 1KΩ load)
  
• Sensitivity: -36 dB re 1 Volt/Pascal (16 mV @ 94 dB SPL) +/- 2 dB @ 1kHz
  
• Weight: 831gm
  
• Dimensions: 208mmH x 55mmW x 55mmD

NT2-A

Multi Pattern 1" Condenser Microphone

The NT2-A carries on the tradition forged by the now legendary RØDE NT2. A professional large capsule (1") studio microphone incorporating three-position pick-up patterns, PAD and high pass filter switches conveniently located on the mic body.

At the heart of the NT2-A is the Australian designed and manufactured HF1 dual diaphragm capsule. The frequency and transient response of this transducer has been voiced to complement today's modern recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the 50's and 60's. These features provide the flexibility and superlative audio characteristics that make the NT2-A one of the most versatile condenser mics available.

Features:

• Large 1" (25mm) HF1 gold sputtered capsule
  
• On body control of polar pattern, HPF and PAD
  
• Three position variable polar pattern - Omni, Cardioid or Figure 8
  
• Three position variable High-Pass Filter - Flat, 40Hz or 80Hz
  
• Three position PAD - 0dB, -5dB or -10dB
  
• Ultra low noise, transformerless surface mount circuitry
  
• Wide dynamic range
  
• Internal capsule shock mounting

Specifications:

• Power: P48 (48V) phantom supply
  
• Acoustic Principle: Pressure, Pressure gradient
  
• Directional Pattern: Three position variable - Omni, Cardioid or Figure 8
  
• Frequency range: 20 Hz - 20 kHz
  
• Output impedance: 200Ω
  
• Signal noise ratio: 87 dB SPL (A - weighted per IEC651)
  
• Equivalent noise: 7 dB SPL (A - weighted per IEC651)
  
• Maximum SPL: 147dB SPL (@ 1kHz, 1% THD into 1KΩ load) (157dB with PAD at maximum)
  
• Maximum output: voltage +16dBu (@ 1kHz, 1% THD into 1KΩ load)
  
• Sensitivity: -36 dB re 1 Volt/Pascal (16 mV @ 94 dB SPL) +/- 2 dB @ 1kHz
  
• Weight: 860gm
  
• Dimensions: 209mmH x 55mmW x 55mmD

NT1000

Ultra Versatile 1" Studio Condenser Microphone

With its ultra low 6 dBA self-noise and transformer less SMT circuitry, the RØDE NT1000 exhibits exceptional performance when recording both vocals and instruments in the studio.

Voiced for 'application versatility', the NT1000 has been hailed by many as the ultimate drum over-head and grand piano mic selection. The NT1000 is also equally at home as a first call vocal mic. With its Australian made 1" HF-2 capsule incorporating internal shock mounting, the NT1000 boasts a 134 dB dynamic range, and 140 dBA SPL capabilities and a 20 Hz - 20 kHz frequency response.

Features:

• HF2 1" capsule with gold-plated diaphragm
  
• Ultra low noise transformerless circuitry
  
• Cardioid polar pattern
  
• Durable satin nickel finish
  
• High strength welded and heat-treated mesh head
  
• Internal capsule shock mounting
  
• True externally biased condenser
  
• Full frequency response

Specifications:

• Power: P48 (48V), P24 (24V) phantom supply
  
• Acoustic Principle: Pressure gradient
  
• Directional Pattern: Cardioid
  
• Frequency range: 20 Hz - 20 kHz
  
• Output impedance: 100Ω
  
• Signal noise ratio: >88 dB SPL (A - weighted per IEC651)
  
• Equivalent noise: 6 dB SPL (A - weighted per IEC651)
  
• Maximum SPL: 140dB SPL (@ 1kHz, 1% THD into 1KΩ load)
  
• Maximum output voltage: +13dBu (@ 1kHz, 1% THD into 1KΩ load)
  
• Sensitivity: -36 dB re 1 Volt/Pascal (16 mV @ 94 dB SPL) +/- 2 dB @ 1kHz
  
• Weight: 682gm
  
• Dimensions: 209mmH x 54mmW x 54mmD

NT1-A

The World's Quietest Studio Condenser Microphone

The RØDE NT1-A has become an industry standard; delivering the warmth, extended dynamic range, clarity and high SPL capability usually only featured by some of the most expensive microphones.

Now available as the ‘Complete Vocal Recording Solution’ this NT1-A package now includes everything you need to get truly professional vocal recordings - the world’s quietest studio microphone, a studio grade pop shield and shock mount, a premium 20’ cable, dust cover, an instructional DVD with recording tips, and of course RØDE’s industry leading ten year warranty.

Features:

• Large 1" (25mm) capsule with gold plated diaphragm
  
• Cardioid polar pattern
  
• Self noise of only 5dB (A)
  
• Ultra low noise, transformerless surface mount circuitry
  
• Wide dynamic range
  
• Gold plated output contacts
  
• True condenser (externally biased)
  
• Internal capsule shock mounting
• Also available as a matched pair.

Specifications:

• Power: P48 (48V), P24 (24V) phantom supply
  
• Acoustic Principle: Pressure gradient
  
• Directional: Pattern Cardioid
  
• Frequency range: 20 Hz - 20 kHz
  
• Output impedance: 100Ω
  
• Signal noise ratio: >88 dB SPL (A - weighted per IEC651)
  
• Equivalent noise: 5 dB SPL (A - weighted per IEC651)
  
• Maximum SPL: 137dB SPL (@ 1kHz, 1% THD into 1KΩ load)
  
• Maximum output voltage: +13.7dBu (@ 1kHz, 1% THD into 1KΩ load)
  
• Sensitivity: -32 dB re 1 Volt/Pascal (25 mV @ 94 dB SPL) +/- 2 dB @ 1kHz
  
• Weigh:t 326gm
  
• Dimensions: 190mmH x 50mmW x 50mmD